Silk'n Conductive Slider Gel for Microcurrent & RF Devices, 4.4 fl oz — Water-Based Hyaluronic Hydrating Formula

Silk'n Conductive Slider Gel is a clear, water-based hyaluronic gel designed to act as the conductive medium for at-home RF, microcurrent and EMS skin tightening devices.

This Slider Gel is the official companion formula for Silk'n FaceTite, Titan and Silhouette devices and is also suitable for many other at-home systems that require a clear, water-based conductive product. Its water-rich base and sodium hyaluronate help the device head glide smoothly and maintain skin hydration during treatments while supporting safe, even energy transfer. The fragrance-, paraben- and sulfate-free formula is vegan and formulated for a broad range of skin types and tones.

How does this gel help my RF or microcurrent device work better?

The gel provides a continuous, conductive layer between the device applicator and your skin so electrical and RF energy can move evenly into the treated area. Without an appropriate water-based gel, devices can drag, produce uneven heating, or struggle to maintain consistent contact. Silk'n Slider Gel is formulated specifically to allow bipolar RF and microcurrent technologies to perform as intended.

• Creates a low-friction surface for smoother passes
• Ensures predictable energy conduction across the treatment area
• Helps prevent localized overheating and skin reddening
• Compatible with Silk'n FaceTite, Titan, Silhouette and many third-party devices

What are the key ingredients and are they safe for my skin?

The primary base is water, with sodium hyaluronate included to support skin moisture during and after the session. The formula avoids parabens, sulfates and added fragrance, minimizing common irritants. It’s designed for broad skin-type compatibility, but should not be used on broken or inflamed skin.

• Water-based conductive medium for safe device use
• Sodium hyaluronate (hyaluronic derivative) for temporary hydration support
• Fragrance-, paraben- and sulfate-free; vegan ingredient list
• Not intended for children under six or for damaged skin

How should I use the Silk'n Slider Gel for best results?

Apply a thin, even coat to the area you plan to treat before switching the device on; a little goes a long way. Too much gel won’t improve device performance and can make control harder, while too little can reduce conduction and increase friction. Wipe off excess after treatment and store the tube in a cool, dry place.

• Dispense a small amount and spread evenly over the treatment zone
• Turn on your device only after gel application to ensure contact
• Use the recommended session frequency from your device manual
• Stop use if irritation or unusual redness occurs

Can I use this gel with other brands and devices?

While formulated as Silk'n’s official conductive medium, the clear, water-based formula works with many at-home microcurrent, RF and EMS devices that require a similar gel. Always confirm your device manufacturer’s recommendations before use. Avoid oil- or silicone-based products that are not intended for electrical conduction.

• Compatible with most devices needing a clear, water-based conductor
• Not suitable for oil or silicone-based device instructions
• Check device manual for any material-specific warnings
• Use caution around the eye area and avoid damaged skin

Who this is for: Silk'n Conductive Slider Gel is suited to anyone using Silk'n FaceTite, Titan or Silhouette devices, or other at-home RF, microcurrent or EMS systems that call for a clear water-based gel. It’s formulated to be gentle enough for most skin types and tones, providing glide, conduction and hydration support during regular treatments. Do not use on irritated or broken skin, keep out of reach of young children, and discontinue use if irritation develops.

• PURPOSE-BUILT FOR SILK'N FACETITE, TITAN & SILHOUETTE – Engineered as the official conductive medium for Silk'n at-home RF skin tightening devices, this water-based gel ensures bipolar Radio Frequency energy transfers safely and evenly into the skin. Without a clear water-based gel, an RF device cannot deliver its treatment — and using the wrong product can cause dragging, overheating or reddening.
• PROTECTS SKIN FROM OVERHEATING & REDDENING – The 91% water-based formula creates a smooth, conductive layer between device and skin so the treatment head glides without friction and heat dissipates evenly. Designed to keep your treatment comfortable from the first session, even on the highest energy setting.
• COMPATIBLE WITH MICROCURRENT, RF & EMS DEVICES – While engineered for the Silk'n line, the clear, water-based, fragrance-free formula makes this slider gel a versatile conductor for at-home microcurrent, radio frequency and EMS skin tightening devices. Apply a thin layer before treatment for an effortless glide.
• HYALURONIC ACID HYDRATION, SUITABLE FOR ALL SKIN TYPES – Enriched with sodium hyaluronate to help the skin hold moisture during and after treatment. Free from parabens, sulfates and fragrance — formulated with a vegan ingredient list, cleared by Silk'n for all skin types and tones.
• 130 ML / 4.4 FL OZ TUBE FROM A TRUSTED GLOBAL BRAND – Silk'n at-home professional aesthetic devices are trusted by over 10 million users worldwide. Each tube supplies enough gel for multiple weeks of treatment at the recommended 2–3 sessions per week.

Ingredients

Aqua (Water), Glycerin, Propylen Glycol, Triethanolamine, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Carbomer, Phenoxyethanol, Potassium Sorbate, Sodium Hyaluronate, Sodium Chloride, Piroctone Olamine, Caprylyl Glycol, 1,2-Hexanediol